** Attention Valued Customers,
The tent-like BugDorm-2400 insect tent provides a large space for potted plants. Front and back panels of BugDorm-2400 are of clear plastic for observation of insect activity; the two side panels are of Polyester netting (96 x 26 mesh) for ventilation.
There are three openings in the front panel of BugDorm-2400 insect rearing tent. The zippered opening is large enough to insert potted plants. The two smaller sleeve openings (18 cm diameter) on the zippered opening permit addition or removal of insects and replacement of food without letting insects escape.
BugDorm-2400 insect tent is constructed so that support poles are outside the enclosure. There are no places for insects to hide inside BugDorm-2400.
BugDorm-2400 provides a large space for potted plants
(click to enlarge)
|
Model
|
Type
|
Weight
|
Dimensions
(L x W x H)
|
Panels
|
|
Front
|
Back
|
Right
|
Left
|
Floor
|
|
BD2400
|
Dome
|
860 grams
|
75 x 75 x 115 cm
|
Clear Vinyl
|
Clear Vinyl
|
|
|
White Vinyl
|
Assembly
-
Connect two short poles with one 2-way splint to form each side of base.
-
Thread one assembled pole from Step 1 into each of four sleeves on base of BugDorm.
-
Use 3-way splints to complete base frame.
-
Thread one long pole through each of BugDorm's four lower sleeves and into top of each 3-way splint used in Step 3.
-
Push a 2-way splint into top of each pole used in Step 4.
-
Thread one long pole through each of BugDorm's four upper sleeves and into top half of each 2-way splint used in Step 5.
-
Push a 2-way splint into top of each pole used in Step 6.
-
Thread remaining two poles through tabs on top of BugDorm to form an X and into top half of each 2-way splint used in Step 7.
-
Tie ribbons around crossed poles of Step 8.
Caution
-
Operating Temperature: -10 to 60°C
-
When trying to take assembled tent apart, you may find a few poles locked in the splints. Do not force them apart, or you may rip the seam. Try to find a looser connection elsewhere.
|