* Temporarily out of stock. Please contact us for further information.
One purpose of emergence traps is to estimate population densities of insects. The trapping techniques for many emergence traps involve frequent visits to remove insects trapped inside.
Our amphibious emergence trap is basically a floorless tent with a collecting head and collecting bottle. It covers a ground surface area about one by one meters. Because the collecting system of this amphibious emergence trap uses the same design as our SLAM traps (Sea, Land, and Air Malaise trap), it can be left unattended for a long time.
When using the amphibious emergence trap as a soil emergence trap, place the trap over the selected survey spot. About 110-cm tall, this trap provides enough height to cover small shrubs or potted plants. Use dirt to cover the flaps around the base of each side to keep all emerging insects inside. In windy conditions, use tent pegs (included) to stake down loops at each corners.
Left to right (click to enlarge): 1) amphibious emergence trap as aquatic emergence trap;
2) soda bottle & pole connected with float connector;
3) only the head entrance is white, boosting insect catch
One unique feature of our amphibious emergence trap is its ability to float. By connecting ordinary 2-L soda bottles (not included) and our special trap floating kit (sold separately), this trap can be transformed into a aquatic emergence trap for use in wetlands.
The amphibious emergence trap is easy to assemble and highly portable. Each trap has two large dome-shaped openings for easy access to the interior. To boost insect catch, this amphibious emergence trap is black except for the white collecting head entrance.
Contents per Trap
1 Amphibious Emergence Trap
3 Collecting Bottles (500 ml)
4 Tent Pegs
Specifications
Dimensions: See diagram
Weight: 1.5 kg (includes all accessories)
Color: Black with white head entrance
Materials: Support Poles - Shock-corded Fiberglass or Aluminum
Materials: Collecting Bottle - Polyethylene
Assembly
Amphibious Emergence Trap on Land (soil emergence trap)
-
Remove collecting bottle from zipped pocket on top of amphibious emergence trap.
-
Assemble poles. Make sure segments are completely seated in joints.
-
Push ends of one pole into white pockets at diagonal corners of amphibious emergence trap. Careful: do not over bend pole.
-
Clip hooks around pole. Take care to maintain gentle curve in pole.
-
Repeat Steps 3-4 with second pole and black pockets.
-
Put collecting bottle back into zipped pocket on top of amphibious emergence trap.
-
Tie ribbons around neck and body of collecting bottle.
-
Zip up pocket to lock collecting bottle into position.
Amphibious Emergence Trap on Water (floating emergence trap)
-
Complete Steps 1-8.
-
Use built-in ribbons to tie one float connector of floating kit (sold separately) to each corner of trap. Make sure larger end faces down.
-
Remove pole ends from corner pockets.
-
Insert pole ends into hole in top of float connectors.
-
Assemble 3-segment poles of floating kit. Make sure segments are entirely seated in joints.
-
Insert one pole into adjacent corner pockets of trap to form one side of bottom frame.
-
Repeat Step 14 with remaining poles to complete all 4 sides. This bottom frame stabilizes trap in wind and waves.
-
Pour water into four soda bottles (not included). Screw bottles into bottom of float connectors. We suggest using 2-L bottles and filling them about 65% with water (1.3 liters). This will produce enough buoyancy and weight to help trap float steadily on fresh water. Even so, you should test on site to see how much water is actually needed.
NOTE Parts of trap floating kit do not float. They will sink if dropped in water.
|
